How to make generator from dc motor

 Generator From Motor. Very Simple.

Here we used two 12 Volts toy/ Old Tap-recorder Motors(From trash). One as a Motor  ( Turbne) and other one as a Generator/alternator. A whitle LED is coneccted as a Load to the Generator Ourput.

Note That this is seems to be a Motor-Generator Set, but No.. Because Motor-Generator  Set ( AC Motor and DC Generator) used as a Convertor (AC to DC and vice versa), and here we used it for glowing an LED ( For showing that how can we use a DC motor as a DC Generator).

MATERIALS:

• 2 Toy or Old Tap recorders Motor (one as a motor and other as a generator).
• 1 LED.
• One big rubber band as a belt.
• 2 pulleys (one small and other is large one).
• Flexi wire.
• 4 screws.
• Wooden piece.
• Metal strip.

METHODS:

1 Install both motors (one as a motor and other one as a generator) on wooden piece tightly by metal strip and tight the screws.
2 Connect both motors (one as a motor and other one as a generator) by rubber band or belt which is fixed in the pulley.
3 Connect an LED to the generator output (Red and black)
4 Connect the motor with 12VDC, and run it as a turbine. It will rotate the armature of generator by belt and current will produce in the generator that will glow the LED.